PasteShr

New Paste Browse

opencomputers draconic reactor controller
--dercc (Draconic Evolution Reactor Complete Control) V1.1
--Official Stamper (c) Aug 2018

--Changelog V1.0.1 added maxFuel = 10368 to use as factor in getOutFlux function
--          V1.0.2 added tempDrainFactor to info. and fuelUseRate to getOutFlux, but made no difference to low fuel calcs :(
--          V1.1.0 added OpenComputers layer

-- *** REQUIRED *** --
local modemTx = 21				-- Must be a unique channel not used by any other computer on the server and MUST be the same as the reactor modem channel(s)
local modemRx = 21				-- Must be a unique channel not used by any other computer on the server and MUST be the same as the reactor modem channel(s)

opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
-- *** REQUIRED FOR COMPUTERCRAFT *** --
local modemSide = 'back'
local monitorSide = 'top'
local inFluxSide = 'right'                                   -- required for CC (ComputerCraft) only, Side of the Flux Gate used as Input into the reactor to power the Containment Field and warm up the reactor
local outFluxSide = 'left'                                   -- required for CC (ComputerCraft) only, Side of the Flux Gate used as Output of RF from reactor into your RF Storeage solution

-- *** REQUIRED FOR OPENCOMPUTERS *** --
local inFluxAddr = 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'    -- required for OC (OpenComputers) only, Address of the Flux Gate used as Input into the reactor to power the Containment Field and warm up the reactor
local outFluxAddr = 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'   -- required for OC (OpenComputers) only, Address of the Flux Gate used as Output of RF from reactor into your RF Storage solution

opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
-- *** STARTUP VALUES *** --
local reqTemp = 6000      									 -- Default starting required temperature (this is used if error caused reboot or server restarts)
local reqField = 10       									 -- Default starting required field (this is used if error caused reboot or server restarts)

-- Recommended no other values below are changed
-- Debug only
local skip = 0

-- Startup Values
local waitTime = 0.05       -- time/ticks between event operations (0.05 = 1 tick @ 20TPS) - time to wait for modem to respond, recommended value 0.10
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
local minTemp = 2500		-- minimum temperature allowed (also used for fail-safe, do not change)
local maxTemp = 20000000		-- maximum temperature allowed
local cutoffTemp = 20000000		-- shutdown reactor if temp exceeds this value
local warmUpRF = 20000000   -- how much RF/t to inject to warm reactor up to get to over 2000C
local minField = 1			-- minimum field percentage allowed
local maxField = 100			-- maximum field percentaged allowed
local inFluxRF = 0      	-- default value for offline, cooling or cold
local outFluxRF = 25000     	-- default value for offline, cooling or cold
local graphLen = 44			-- width graphs will take on screen
local screenWidth = 50      -- width of screen
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
	
-- Tweaks
local outTrimPct = 1        -- 2 = 200%, 1 = 100%, 0.5 = 50%	the percentage of the genRate difference to trim the outFluxRF
	
-- other variable initialisation (do not change these values as declare and/or constants only)
local info = {}					-- table for holding reactor.info
local debugMode = false     	-- flag used to indicate if the monitor is on the debug screen or normal screen array
local msg = ''					-- for sending adhoc messages to screen
local timerId = 0           	-- event timer
local oc_id = 0                 -- because OpenComputers timer Id's do not work
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
local maxId = 65535         	-- maximun number that can be sent as a modem id
local maxFuel = 10368       	-- maximum possible fuel
local maxInteger = 2147483647 	-- maximun integer allowed (math.maxInteger doesn't seem to work here)

--Peripherals and components (do not initialise to values)
local monitor
local modem 
local outFlux = {}
local inFlux = {} 
local serialization
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
local fileIO

--check os version
local OSVer = ""
local OC = false
local CC = false

if _OSVERSION then
	OSVer = _OSVERSION
	OC = true
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
elseif os.version() then
	OSVer = os.version()
	CC = true
else
	print("OS not supported!")
	return
end

print("OSVer: "..OSVer)
print("OpenComputers: "..tostring(OC))
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
print("ComputerCraft: "..tostring(CC))

--ComputerCraft - wrap the peripherals
if CC then
	fileIO = fs
	monitor = peripheral.wrap(monitorSide)
	modem = peripheral.wrap(modemSide)
	if not modem then print("No modem found, please attach an 'Ender Modem'"); return; end
	outFlux = peripheral.wrap(outFluxSide)
	if not outFlux then print("No Flux Gate found for side '"..outFluxSide.."', please attach a Flux Gate"); return; end
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
	inFlux = peripheral.wrap(inFluxSide)
	if not inFlux then print("No Flux Gate found for side '"..inFluxSide.."', please attach a Flux Gate"); return; end
	print('inFlux='..inFluxSide)
	print('outFlux='..outFluxSide)
end

--OpenComputers - Override ComputerCraft API's to make compatable with OpenComputers
if OC then
	local component = require("component")
	local computer = require("computer")
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
	local event = require("event")
	local term = require("term")
	fileIO = require("filesystem")
	serialization = require("serialization")
	
	--GPU check
	if not component.gpu or component.gpu.getDepth() ~= 8 then 
		print("No GPU or incorrect Tier GPU present, please install Graphics Card (Tier 3)")
		os.exit()
	end
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
	local gpu = component.gpu
	
	--Modem Check
	if not component.modem or not component.modem.isWireless() then 
		print("No wireless modem present, please install Wireless Network Card (Tier 2)")
		os.exit()
	end
	modem = component.modem

--Flux gate checks
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
	for i, v in pairs(component.list("flux_gate")) do
		print("Found: "..v.." : "..i)
		if i == inFluxAddr then inFlux = component.proxy(inFluxAddr) end
		if i == outFluxAddr then outFlux = component.proxy(outFluxAddr) end
	end
	if not inFlux.address or not outFlux.address then
		print("Flux Gate(s) are not present or incorrect address specified, please check flux gates and address(s) specified")
		print("inFluxAddr: "..inFluxAddr.." Found: "..tostring(inFlux.address))
		print("outFluxAddr: "..outFluxAddr.." Found: "..tostring(outFlux.address))
		os.exit()
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
	end

-- Overrides
	modem.transmit = modem.broadcast
	colors = {
		white		=0xF0F0F0,
		orange		=0xF2B233,
		magenta		=0xE57FD8,
		lightBlue	=0x99B2F2,
		yellow		=0xDEDE6C,
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
		lime		=0x7FCC19,
		pink		=0xF2B2CC,
		gray		=0x4C4C4C,
		lightGray	=0x999999,
		cyan		=0x4C99B2,
		purple		=0xB266E5,
		blue		=0x3366CC,
		brown		=0x7F664C,
		green		=0x57A64E,
		red			=0xCC4C4C,
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
		black		=0x191919,
		['0']		=0xF0F0F0,
		['1']		=0xF2B233,
		['2']		=0xE57FD8,
		['3']		=0x99B2F2,
		['4']		=0xDEDE6C,
		['5']		=0x7FCC19,
		['6']		=0xF2B2CC,
		['7']		=0x4C4C4C,
		['8']		=0x999999,
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
		['9']		=0x4C99B2,
		a			=0xB266E5,
		b			=0x3366CC,
		c			=0x7F664C,
		d			=0x57A64E,
		e			=0xCC4C4C,
		f			=0x191919
	}
	monitor = {
		setResolution		= function(inX, inY)    gpu.setResolution(inX, inY) end,
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
		resetResolution     = function() 			local rx, ry = gpu.maxResolution(); gpu.setResolution(rx, ry) end,
		setBackgroundColor  = function(inCol) 		gpu.setBackground(inCol) end,
		setTextColor        = function(inCol) 		gpu.setForeground(inCol) end,
		setCursorPos	    = function(inX, inY) 	term.setCursor(inX, inY) end,
		write               = function(inStr) 		term.write(inStr, false) end,
		blit				= function(inStr, fCol, bCol) 	
									local _f = string.sub(fCol, 1, 1)
									local _b = string.sub(bCol, 1, 1)
									local _p = 1
									local _l = string.len(inStr)
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
									for i = 1, _l do
										if string.sub(fCol, i, i) ~= _f or string.sub(bCol, i, i) ~= _b or i == _l then
											gpu.setBackground(colors[_b])
											gpu.setForeground(colors[_f])
											term.write(string.sub(inStr, _p, i - 1 + ((i == _l) and 1 or 0)))
											_f = string.sub(fCol, i, i)
											_b = string.sub(bCol, i, i)
											_p = i
										end
									end
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
								end,
		clear				= function() 					term.clear() end
	}
	os.getComputerID = computer.address
	os.pullEvent = event.pull
	os.queueEvent = event.push

local function ocTimer() 
		event.push('timer', timerId)
	end
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller

os.startTimer =	function(inWaitTime) 
						--OpenComputers does not return a unique Event Id, so have to manage our own
						local _id = timerId + 1
						if _id >= maxInteger - 1 then _id = 1 end
						oc_id = event.timer(inWaitTime, ocTimer)
						return _id 
					end
	os.cancelTimer = function()
						event.cancel(oc_id)
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
					 end
	os.reboot = function()
						computer.shutdown(true)
					end
	
end

local function modTemp(val)
	reqTemp = reqTemp + val
	if reqTemp > maxTemp then reqTemp = maxTemp end
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
	if reqTemp < minTemp then reqTemp = minTemp end
end

local function modField(val)
	reqField = reqField + val
	if reqField > maxField then reqField = maxField end
	if reqField < minField then reqField = minField end
end

local state = {
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
	active 		= "active",
	disabled 	= "disabled",
	enabled 	= "enabled",
	off 		= "off"
}

local buttonColors = {
	active 		= function() 
						monitor.setBackgroundColor(colors.green)
						monitor.setTextColor(colors.white)
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
					end,
	disabled 	= function() 
						monitor.setBackgroundColor(colors.gray)
						monitor.setTextColor(colors.black)
					end,
	enabled 	= function() 
						monitor.setBackgroundColor(colors.lightGray)
						monitor.setTextColor(colors.white)
					end,
	off 		= function() 
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
						monitor.setBackgroundColor(colors.black)
						monitor.setTextColor(colors.lightGray)
					end
}

local buttonType = {
	label = {
		id = 'label',
		setColors = function() 
				monitor.setBackgroundColor(colors.black) 
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
				monitor.setTextColor(colors.white) 
			end
		},
	button = {
		id = 'button',
		setColors = function(inState) 
				buttonColors[inState]() 
			end
		},
	val1 = {
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
		id = 'val1',
		setColors = function() 
				monitor.setBackgroundColor(colors.gray) 
				monitor.setTextColor(colors.white) 
			end
		},
	val10 = {
		id = 'val10',
		setColors = function() 
				monitor.setBackgroundColor(colors.lightGray)
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
				monitor.setTextColor(colors.white) 
			end
		}
}

local function printStatic(inTable)
	monitor.clear()
	monitor.setBackgroundColor(inTable.bCol)
	monitor.setTextColor(inTable.fCol)
	for i, v in pairs(inTable.array) do
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
		monitor.setCursorPos(1, i)
		monitor.write(v)
	end
	monitor.setCursorPos(1,2)       --display any std out on line 2
end

local function printUpdates(inTable)
	for i, v in pairs(inTable) do
		monitor.setCursorPos(v.x, v.y)
		if v.blit then
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
			monitor.blit(v.txt(), v.fCol(), v.bCol())
		else
			if v.bCol then monitor.setBackgroundColor(v.bCol()) end
			if v.fCol then monitor.setTextColor(v.fCol()) end
			monitor.write(v.txt())
		end
	end
	monitor.setCursorPos(1,2)       --display any std out on line 2
end

opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
local function printButtons(inTable)
	for n, b in pairs(inTable) do
		if b.depressed then
			monitor.setBackgroundColor(colors.green)
			monitor.setTextColor(colors.red)
			b.depressed = b.depressed - 1
			if b.depressed == 0 then b.depressed = nil; end
		else
			buttonType[b.type].setColors(b.state)
		end
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
		monitor.setCursorPos(b.x,b.y)
		monitor.write(b.txt)
	end
	monitor.setCursorPos(1,2)       --display any std out on line 2
end

local infoStatus = {
	['cold'] 		= function() return colors.lightBlue; end,
	['running']		= function() return colors.green; end,
	['stopping'] 	= function() return colors.yellow; end,
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
	['warming_up']  = function() return colors.yellow; end,
	['beyond_hope'] = function() return colors.red; end,
	['cooling'] 	= function() return colors.orange; end
}

local function callReactor(request)
	if request == 'getReactorInfo' then
		timerId = os.startTimer(waitTime)
	end
	local int, _ = math.modf(timerId / maxId)
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
	local _id = timerId - (maxId * int)
	-- Transmit variables for use by a.n.other computer sniffing the wifi to monitor taffic and/or reactor(s)
	local tRequest = {req = request, inRF = inFluxRF, outRF = outFluxRF, reqTemp = reqTemp, reqField = reqField}
	if OC then tRequest = serialization.serialize(tRequest) end  --stupid OpenComputers can't handle tables, have to serialize
	modem.transmit(modemTx, _id, tRequest) 
end

local function getInFlux()
	-- Field(shield) Calculation
	local reqFieldStrength = (info.maxFieldStrength / 100) * reqField
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller

if info.temperature > 8000 then
		info.tempDrainFactor = 1 + ((info.temperature - 8000)^2 * 0.0000025)
	elseif info.temperature > 2000 then
		info.tempDrainFactor = 1
	elseif info.temperature > 1000 then
		info.tempDrainFactor = (info.temperature - 1000) / 1000
	else
		info.tempDrainFactor = 0
	end
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller

--fieldDrainRate calculation needs to be calculated on startup, else we can use info.fieldDrainRate	
	if not info.fieldDrainRate or info.fieldDrainRate == 0 then
		local baseMaxRFt = (3 * info.maxEnergySaturation) / 2000 -- converted for integer maths
		local drainMax = math.max(0.01, (1 - info.satPct))
		info.fieldDrainRate = math.ceil(math.min(info.tempDrainFactor * drainMax * (baseMaxRFt / 10.923556), maxInteger))  -- 2147483647 = math.maxinteger which doesnt work here :(
	else
		--info.fieldDrainRate = info.fieldDrainRate
	end
	
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
	--fieldCharge calculation based on the required field strength
	local fieldNegPercent = 1 - (reqFieldStrength / info.maxFieldStrength)
	local fieldInputRate = info.fieldDrainRate / fieldNegPercent
	info.fieldCharge = reqFieldStrength - math.min(info.fieldDrainRate , reqFieldStrength)

-- injectEnergy  (happens after update)
    local tempFactor = 1
    if info.temperature > 15000 then
      tempFactor = 1 - math.min(1, (info.temperature - 15000) / 10000)
    end
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller

local rf = inFluxRF
	if inFluxRF == 0 then rf = 1 end
	
	info.fieldCharge = info.fieldCharge + math.min(rf * (1 - (info.fieldCharge / info.maxFieldStrength)) , info.maxFieldStrength - info.fieldCharge) * tempFactor
	info.reqInDiff = reqFieldStrength - info.fieldCharge
	local inFlux = rf + ((info.maxFieldStrength * info.reqInDiff) / (info.maxFieldStrength - info.fieldCharge))

--to speed things up, subtract the current field from the reqField and add the difference to the rf (divided by 10)
	inFlux = inFlux + ((reqFieldStrength - info.fieldStrength) / 10)
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller

if inFlux < 0 then inFlux = 0 end
	
	return inFlux

end

local function getRiseAmt()
	-- Calculate the current resist and expo(nential)
	local t50 = info.temperature / 10000 * 50
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
	local tResist = (t50^4) / (100 - t50)
	local tfResist = ((1.3 * info.fuelPct * tResist) + (1300 * info.fuelPct) - (1.3 * tResist) - 300) / 10000
	local negCSat = (1 - info.satPct) * 99
	local tExpo = (((negCSat^3) / (100 - negCSat)) + 444.7) / 10000
	local tRiseAmt = (tfResist + tExpo) * 100 --correct format for display on debug screen 
	
	return tRiseAmt
	
end

opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
local function getOutFlux()
	--fuel use rate
	if info.fuelPct > 0 then
		local fuelUseRate = info.tempDrainFactor * (1 - info.satPct) * 0.001
		info.fuelPct = (info.fuelConversion + fuelUseRate) / info.maxFuelConversion
	end

-- RF out calculation
	info.outDiff = reqTemp - info.temperature
	--calculate the required resist
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
	local reqTResist = -(reqTemp^4 / (8000000 * (reqTemp - 20000)))
	local reqResist = ((1.3 * info.fuelPct * reqTResist) + (1300 * info.fuelPct) - (1.3 * reqTResist) - 300) / 10000
	-- The required Expo will be a reversed sign of reqResist
	local reqExpo = ((reqResist * -1) * 10000) - 444.7  
	local _E = reqExpo
	--reverse the expo to get the expected required saturation%
	local revNegCSat =(((math.sqrt(3)*(math.sqrt((_E^3)+(67500*(_E^2)))))+(450*_E))^(1/3))/(3^(2/3))-(_E/((3^(1/3))*(((math.sqrt(3)*(math.sqrt((_E^3)+(67500*(_E^2)))))+(450*_E))^(1/3))))
	--calculate the required genRate
	info.reqGenRate = (revNegCSat / 99) * (((info.maxEnergySaturation / 1000) * 1.5) * (1 + (((info.fuelPct * 1.3) - 0.3) * 2)))
	--subtract the current genRate from the required genRate to get the new outGenRate
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
	info.outGenRate = info.reqGenRate - info.generationRate
	
	if math.abs(info.outDiff) > 1 then
		info.outSpeed = info.outDiff * (info.temperature / reqTemp ) * 10 * (info.maxFuelConversion / maxFuel)
		info.outIncrease = info.outGenRate + info.outSpeed
		info.outGenRateTrim = 0
	elseif math.abs(info.outDiff) == 1 then
		info.outSpeed = 0
		info.outIncrease = info.outGenRate
		info.outGenRateTrim = info.outGenRate * outTrimPct
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
	else
		info.outSpeed = 0
		info.outIncrease = 0
		info.outGenRateTrim = info.outGenRate * outTrimPct
	end
	
	local outFlux = info.reqGenRate + info.outIncrease + info.outSpeed + info.outGenRateTrim
	
	if outFlux < 0 or info.generationRate == 0 or outFlux == (1 / 0) or outFlux ~= outFlux then outFlux = 1000 end
	
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
	return outFlux

end

local function getGraph(inVal, inMax, inSize)
	local strGraph = ''
	local val = (((inVal / inMax) * inSize) - 1)  	--divide the width of screen by the colored chunks required
	for i = 1, val do								-- build the '='
		strGraph = strGraph.."="
	end
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
	strGraph = strGraph..">"						-- concat the '>'
	for i = val, inSize do							-- set the remaining width to spaces
		strGraph = strGraph.." "
	end
	
	--In case we have a divide by zero, thus no data, pad the string out with spaces
	strGraph = strGraph..string.rep(" ",inSize)
	strGraph = string.sub(strGraph,1,inSize)
	return strGraph
	
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
end

local function fmtNum( inVal, inWidth, inDec, boolC )
	--because string.format is broken in ComputerCraft, need own format function
	local rtn = inVal
	if type(rtn) == 'number' then
		--Round and get the modulus padded with zeros
		local mod
		if inDec > 0 then											-- number of decimal places
			inVal = (math.floor(inVal * (10^(inDec)) + 0.5) / 10^(inDec))   -- round to the specified decimal places
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
			-- multiply by 10 to the power of decimals places
			mod = math.floor((inVal % 1) * ( 10 ^ (inDec) ))
			-- pad the decimal with zeros
			mod = string.rep(
				"0",(
						( (inDec-string.len(mod)>=0)  and 1 or 0)
						* (inDec-string.len(mod))
					)
				)..mod
		end
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
		-- get the integral part
		local int = math.floor(inVal)

-- add the commas
		while boolC do
			local k
			int, k = string.gsub(int, "^(-?%d+)(%d%d%d)", '%1,%2')
			if (k==0) then
				break
			end
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
		end

if mod then
			-- concatonate integral with modulus and decimal point
			rtn = int.."."..mod
		else
			rtn = int	
		end
		
		-- pad with leading spaces
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
		local pad = inWidth - string.len(rtn)

if pad > 0 then rtn = string.rep(" ",(pad) )..rtn end
	else
		rtn = tostring(rtn)
		rtn = string.rep(" ",inWidth - string.len(rtn))..rtn
	end
	rtn = string.sub(rtn,1,inWidth)
	return rtn
end
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller

local scrnStatic = {
	main = {
		bCol = colors.black,
		fCol = colors.lightBlue,
		x = 1,
		y = 1,
		array = {
			'                                                  ',
			'                                                  ',
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
			'Temp:                                             ',
			'                                                  ',
			'Fld:                                              ',
			'                                                  ',
			'Satn:                                             ',
			'                                                  ',
			'Fuel:                                             ',
			'                                                  ',
			'FldDrainRate:            GenRate:                 ',
			'In(Field):           Gain:           Out:         '
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
			}
		},
	debug = {
		bCol = colors.black,
		fCol = colors.lightBlue,
		x = 1,
		y = 1,
		array = {
			'Status             Debug Screen                   ',
			'                                                  ',
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
			'Fld:                                 Temp:        ',
			'FldChrg:                  outDiff:                ',
			'                          riseAmt:                ',
			' reqInDiff:              tRiseAmt:                ',
			'                       reqGenRate:                ',
			'                       outGenRate:                ',
			'                      outIncrease:                ',
			'fieldDrain:            speed/trim:                ',
			'fldDrnRate:               GenRate:                ',
			'In(Field):           Gain:           Out:         '
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
		}
	}
}

local scrnDynamic = {
	main = {
		[1] = { --status = {
			x = 8,
			y = 1,
			fCol = function() return infoStatus[info.status](); end,
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
			bCol = function() return colors.black; end,
			txt = function() return string.sub(info.status..'      ',1,10) end
			},
		[2] = { --tempVal = {
			x = 7,
			y = 3,
			fCol = function() 
						if math.floor(info.temperature) > reqTemp and info.temperature > 2500 then 
							return colors.red
						else 
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
							return colors.white 
						end 
					end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(math.floor(info.temperature),4,0,false).."C"	end
			},
		[3] = { --reqTemp = {
			x = 37,
			y = 3,
			fCol = function() return colors.blue; end,
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(reqTemp,4,0,false).."C" end
			},
		[4] = { --tempVal2 = {
			x = 1,
			y = 4,
			fCol = function() 
						if math.floor(info.temperature) > reqTemp and info.temperature > 2500 then 
							return colors.red
						else 
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
							return colors.white 
						end 
					end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(math.floor(info.temperature),5,0,false).."C" end
			},
		[5] = { --tempBar = {
			x = 7,
			y = 4,
			blit = true,
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
			fCol = function() return string.rep("f",graphLen); end,
			bCol = function() return "eeeeeeeeeee111111111114444444444400000000000"; end,
			txt = function() return getGraph(info.temperature, cutoffTemp, graphLen) end
			},
		[6] = { --field = {
			x = 7,
			y = 5,
			fCol = function() return colors.white; end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(math.floor(info.fieldStrength),9,0,false).."/"..fmtNum(info.maxFieldStrength,9,0,false) end
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
			},
		[7] = { --reqField = {
			x = 37,
			y = 5,
			fCol = function() return colors.blue; end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(reqField,3,0,false).."%" end
			},
		[8] = { --fieldPct = {
			x = 1,
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
			y = 6,
			fCol = function() 
						if info.status == 'cold' or info.status == 'offline' or info.status == 'cooling' then
							return colors.white;
						else
							local fieldPct = info.fieldPct * 100
							if     fieldPct < reqField - 0.5 then return colors.red;
							elseif fieldPct < reqField - 0.2 then return colors.orange;
							elseif fieldPct < reqField - 0.1 then return colors.yellow;
							else return colors.white;  
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
							end
						end
					end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(info.fieldPct*100,5,2,false).."%" end
			},
		[9] = { --fieldBar = {
			x = 7,
			y = 6,
			blit = true,
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
			fCol = function() return string.rep("f",graphLen); end,
			bCol = function() return "eeeeeeeeeaaaaaaaaa222222222bbbbbbbbb99999999"; end,
			txt = function() return getGraph(info.fieldStrength, info.maxFieldStrength, graphLen) end
			},
		[10] = { --sat = {
			x = 7,
			y = 7,
			fCol = function() return colors.white; end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(math.floor(info.energySaturation),9,0,false).."/"..fmtNum(info.maxEnergySaturation,10,0,false) end
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
			},
		[11] = { --satPct = {
			x = 1,
			y = 8,
			fCol = function() 
						local satPct = info.satPct*100
						if     satPct > 99 then return colors.red; 
						elseif satPct > 95 then return colors.orange; 
						elseif satPct > 90 then return colors.yellow; 
						else return colors.white; 
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
						end
					end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(info.satPct*100,5,2,false).."%" end
			},
		[12] = { --satBar = {
			x = 7,
			y = 8,
			blit = true,
			fCol = function() return string.rep("f",graphLen); end,
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
			bCol = function() return "eeeeeeeeeeeeeeeddddddddddddddd99999999999999"; end,
			txt = function() return getGraph(info.energySaturation, info.maxEnergySaturation, graphLen) end
			},
		[13] = { --fuel = {
			x = 7,
			y = 9,
			fCol = function() return colors.white; end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(info.fuelConversion,9,3,false).."/"..fmtNum(info.maxFuelConversion,5,0,false) end
			},
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
		[14] = { --fuelPct = {
			x = 1,
			y = 10,
			fCol = function() 
						local fuelPct = info.fuelPct*100
						if     fuelPct > 95 then return colors.red;
						elseif fuelPct > 90 then return colors.orange;
						elseif fuelPct > 85 then return colors.yellow;
						else return colors.white; 
						end
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
					end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(info.fuelPct*100,5,2,false).."%" end
			},
		[15] = { --fuelBar = {
			x = 7,
			y = 10,
			blit = true,
			fCol = function() return string.rep("f",graphLen); end,
			bCol = function() return "44444444444ddddddddddd22222222222eeeeeeeeeee"; end,
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
			txt = function() return getGraph(info.fuelConversion, info.maxFuelConversion, graphLen) end
			},
		[16] = { --fieldDrainRate = {
			x = 14,
			y = 11,
			fCol = function() return colors.white; end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(info.fieldDrainRate,9,0,false) end
			},
		[17] = { --generationRate = {
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
			x = 34,
			y = 11,
			fCol = function() return colors.white; end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(info.generationRate,9,0,false) end
			},
		[18] = { --inFluxRF = {
			x = 11,
			y = 12,
			fCol = function() return colors.white; end,
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(inFluxRF,8,0,false) end
			},
		[19] = { --gain = {
			x = 28,
			y = 12,
			fCol = function() return colors.white; end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(outFluxRF-inFluxRF,8,0,false) end
			},
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
		[20] = { --outFluxRF = {
			x = 43,
			y = 12,
			fCol = function() return colors.white; end,
			bCol = function() return colors.black; end,
			txt = function() return fmtNum(outFluxRF,8,0,false) end
			}
		},
	debug = {
		[1] = { --skip = {
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
			x = 1,
			y = 2,
			txt = function() return 'Ticks lost: '..skip.."  TimerId: "..timerId; end
			},
		[2] = { --status = {
			x = 8,
			y = 1,
			txt = function() return string.sub(info.status..'      ',1,10); end
			},
		[3] = { --fldPct = {
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
			x = 5,
			y = 3,
			txt = function() return fmtNum(info.fieldPct*100,5,2,false); end
			},
		[4] = { --field = {
			x = 12,
			y = 3,
			txt = function() return fmtNum(info.fieldStrength,9,0,false).."/"; end
			},
		[5] = { --maxField = {
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
			x = 22,
			y = 3,
			txt = function() return fmtNum(info.maxFieldStrength,9,0,false); end
			},
		[6] = { --temperature = {
			x = 43,
			y = 3,
			txt = function() return fmtNum(info.temperature,4,0,false).."C"; end
			},
		[7] = { --fieldCharge = {
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
			x = 10,
			y = 4,
			txt = function() return fmtNum(info.fieldCharge,11,0,false); end
			},
		[8] = { --outDiff = {
			x = 35,
			y = 4,
			txt = function() return fmtNum(info.outDiff,8,0,false); end
			},
		[9] = { --riseAmount = {
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
			x = 35,
			y = 5,
			txt = function() if info.riseAmount then return info.riseAmount * 10; else return 'N/A'; end; end
			},
		[10] = { --tRiseAmount = {
			x = 35,
			y = 6,
			txt = function() return getRiseAmt(); end
			},
		[11] = { --reqInDiff = {
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
			x = 12,
			y = 6,
			txt = function() return fmtNum(info.reqInDiff,10,0,false); end
			},
		[12] = { --reqGenRate = {
			x = 35,
			y = 7,
			txt = function() return fmtNum(info.reqGenRate,11,2,false); end
			},
		[13] = { --outGenRate = {
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
			x = 35,
			y = 8,
			txt = function() return fmtNum(info.outGenRate,11,2,false); end
			},
		[14] = { --outIncrease = {
			x = 35,
			y = 9,
			txt = function() return fmtNum(info.outIncrease,11,2,false) end
			},
		[15] = { --fieldDrain = {
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
			x = 12,
			y = 10,
			txt = function() return fmtNum(info.fieldDrain,10,2,false); end
			},
		[16] = { --speedTrim = {
			x = 35,
			y = 10,
			txt = function() return fmtNum(info.outSpeed,11,2,false).."/"..tostring(info.outGenRateTrim).."       "; end
			},
		[17] = { --fieldDrainRate = {
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
			x = 12,
			y = 11,
			txt = function() return fmtNum(info.fieldDrainRate,10,2,false); end
			},
		[18] = { --generationRate = {
			x = 35,
			y = 11,
			txt = function() return fmtNum(info.generationRate,8,0,false); end
			},
		[19] = { --inFluxRF = {
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
			x = 11,
			y = 12,
			txt = function() return fmtNum(inFluxRF,8,0,false); end
			},
		[20] = { --gain = {
			x = 28,
			y = 12,
			txt = function() return fmtNum(outFluxRF-inFluxRF,8,0,false); end
			},
		[21] = { --outFluxRF = {
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
			x = 43,
			y = 12,
			txt = function() return fmtNum(outFluxRF,8,0,false); end
			}
		}
}

local buttons = {
	[1] = { --status = {
		x = 1,
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
		y = 1,
		txt = 'Status',
		type = buttonType.label.id,
		state = state.enabled,
		action = function() debugMode = not debugMode; if debugMode then printStatic(scrnStatic.debug); else printStatic(scrnStatic.main); end; end
	},
	[2] = { --charge = {
		x = 18,
		y = 1,
		txt = '[Charge]',
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
		type = buttonType.button.id,
		state = state.off,
		action = function(self) if self.state == state.enabled then callReactor('chargeReactor'); end; end
	},
	[3] = { --activate = {
		x = 28,
		y = 1,
		txt = '[Activate]',
		type = buttonType.button.id,
		state = state.off,
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
		action = function(self) if self.state == state.enabled then callReactor('activateReactor'); end; end
	},
	[4] = { --stop = {
		x = 40,
		y = 1,
		txt = '[Shutdown]',
		type = buttonType.button.id,
		state = state.off,	
		action = function(self) if self.state == state.enabled then callReactor('stopReactor'); end; end
	},
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
	[5] = { --tempUp1 = {
		x = 42,
		y = 3,
		txt = '[]',
		type = buttonType.val1.id,
		action=function() modTemp(1); end,
		state = state.enabled	
	},
	[6] = { --tempUp10 = {
		x = 44,
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
		y = 3,
		txt = '[>]',
		type = buttonType.val10.id,
		action=function() modTemp(10); end,
		state = state.enabled
	},
	[7] = { --tempUp100 = {
		x = 47,
		y = 3,
		txt = '[>>]',
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
		type = buttonType.val1.id,
		action=function() modTemp(100); end,
		state = state.enabled
	},
	[8] = { --tempDown1 = {
		x = 35,
		y = 3,
		txt = '[]',
		type = buttonType.val1.id,
		action=function() modTemp(-1); end,
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
		state = state.enabled
	},
	[9] = { --tempDown10 = {
		x = 32,
		y = 3,
		txt = '[<]',
		type = buttonType.val10.id,
		action=function() modTemp(-10); end,
		state = state.enabled
	},
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
	[10] = { --tempDown100 = {
		x = 28,
		y = 3,
		txt = '[<<]',
		type = buttonType.val1.id,
		action=function() modTemp(-100); end,
		state = state.enabled
	},
	[11] = { --fieldUp1 = {
		x = 42,
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
		y = 5,
		txt = '[]',
		type = buttonType.val1.id,
		action=function() modField(1); end,
		state = state.enabled
	},
	[12] = { --fieldUp10 = {
		x = 44,
		y = 5,
		txt = '[>]',
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
		type = buttonType.val10.id,
		action=function() modField(10); end,
		state = state.enabled
	},
	[13] = { --fieldDown1 = {
		x = 35,
		y = 5,
		txt = '[]',
		type = buttonType.val1.id,
		action=function() modField(-1); end,
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
		state = state.enabled
	},
	[14] = { --fieldDown10 = {
		x = 32,
		y = 5,
		txt = '[<]',
		type = buttonType.val10.id,
		action=function() modField(-10); end,
		state = state.enabled
	}
opencomputers draconic reactor controller PasteShr opencomputers draconic reactor controller
}

local setStatus = {
	["running"] = 	function() 
						buttons[2].state = state.disabled
						buttons[3].state = state.active
						buttons[4].state = state.enabled
					end,
    ["cold"] =  	function() 
						buttons[2].state = state.enabled
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
						buttons[3].state = state.disabled
						buttons[4].state = state.disabled
					end,
	["stopping"] =  function() 
						if info.temperature > 2000 then
							buttons[2].state = state.disabled
							buttons[3].state = state.enabled
						else
							buttons[2].state = state.enabled
							buttons[3].state = state.disabled
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
						end
						buttons[4].state = state.active
					end,
    ["warming_up"] =  function() 
						if info.temperature > 2000 then
							buttons[2].state = state.active
							buttons[3].state = state.enabled
						else
							buttons[2].state = state.active
							buttons[3].state = state.disabled
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
						end
						buttons[4].state = state.enabled
					end,
    ["cooling"] =  function() 
						if info.satPct >= 0.99 then
							buttons[2].state = state.disabled
						else
							buttons[2].state = state.enabled
						end
						buttons[3].state = state.disabled
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
						buttons[4].state = state.active
					end,
	['beyond_hope'] = function() 
						buttons[2].state = state.off
						buttons[3].state = state.off
						buttons[4].state = state.off
					end
}

local function userAction(op1, op2)
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
	local x = op1  -- x coord of where click happened
	local y = op2  -- y coord of where click happened
	--Loop through all the buttons and compare x/y's to see if button was pressed, if so, execute the buttons action function
	for n, b in pairs(buttons) do
		if (x >= b.x and x <= b.x + string.len(b.txt) and y == b.y and b.state == state.enabled) then
			b:action()
			b.depressed = 3
		end
	end

opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
end

local function core()
	if info.fieldStrength    then info.fieldPct = info.fieldStrength    / info.maxFieldStrength;    else info.fieldPct = 0; end
	if info.energySaturation then info.satPct   = info.energySaturation / info.maxEnergySaturation; else info.satPct   = 0; end
	if info.fuelConversion   then info.fuelPct  = info.fuelConversion   / info.maxFuelConversion;   else info.fuelPct  = 0; end
	-- test for Nan and Inf
	if info.fieldPct == (1 / 0) or info.fieldPct ~= info.fieldPct then info.fieldPct = 0; end
	if info.satPct   == (1 / 0) or info.satPct   ~= info.satPct   then info.satPct   = 0; end
	if info.fuelPct  == (1 / 0) or info.fuelPct  ~= info.fuelPct  then info.fuelPct  = 0; end
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
	
	--Safty Checks
	if info.temperature > cutoffTemp or (info.temperature < minTemp and info.satPct >= 0.99) then
		--**** STOP REACTOR ****
		if info.status ~= state.stopping then callReactor("stopReactor"); end
	end

--print("set status")		
	setStatus[info.status]()
	
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
	--print("--Calculate and Set Flux Gate Values")
	if info.status == 'cold' or info.status == 'offline' or info.status == 'cooling' then
		inFluxRF = 0
		outFluxRF = info.generationRate
		
	elseif info.status == 'warming_up' then
		if info.temperature < 2000 then
			inFluxRF = warmUpRF
		else
			inFluxRF = 0
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
		end
		
	elseif info.status == 'stopping' then
		--print("Stopping, so just calculate inFluxRF to maintain containment field, set outFlux to the info.generationRate")
		if reqField < 10 then reqField = 10; end  -- set the containment field to 10% for safety reasons
		inFluxRF = getInFlux()
		outFluxRF = info.generationRate
		
	else
		--print("--Calculate in and out flux requirements")		
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
		inFluxRF = getInFlux()
		outFluxRF = getOutFlux()
	end
	
	--print("--Update Flux Gates with requirements")
	inFlux.setFlowOverride(inFluxRF)
	outFlux.setFlowOverride(outFluxRF)

--print("update screen")
	if debugMode then
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
		monitor.setTextColor(colors.white)
		printUpdates(scrnDynamic.debug)
	else
		printUpdates(scrnDynamic.main)
		printButtons(buttons)
	end
	monitor.setCursorPos(1,2)

end

opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller
local eventHandler = {
	timer 				= function(id, op1, op2, op3, op4, op5)
								if id == timerId then
									callReactor('getReactorInfo')
									skip = skip + 1                           --Debug Only
								end
							end,
	modem_message 		= function(id, op1, op2, op3, op4, op5) 
								if OC then
									op2 = op4
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
									op3 = serialization.unserialize(op5)
								end
								local int, _ = math.modf(timerId / maxId)
								if op2 + (maxId * int) == timerId then 
									os.cancelTimer(timerId)  			-- Cancel the timer as we have the message
									info = op3   -- set reactor info table as returned in op3/message
									core()
									callReactor('getReactorInfo')
								end
							end,
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
	mouse_click 		= function(id, op1, op2, op3, op4) userAction(op1, op2); end,
	eventmouse_click	= function(id, op1, op2, op3, op4) userAction(op1, op2); end,
	monitor_touch 		= function(id, op1, op2, op3, op4) userAction(op1, op2); end,
	touch 				= function(id, op1, op2, op3, op4) userAction(op1, op2); end,
	interrupted			= function() end,   -- TO DO
	['*']				= function() end
}

local function errorHandler(errNo, errMsg)
	if not errNo then
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
		print(tostring(errNo).."	"..tostring(errMsg))
		if errMsg == "Terminated" or errMsg == "interrupted" then
			return
		else
			local f = fileIO.open("log","a")
			f:write("#"..os.getComputerID().." :: "..errMsg.."\n")
			f:close()
			os.reboot() 
--print("Reboot commented")
		end
opencomputers draconic reactor controller How to get it for free? opencomputers draconic reactor controller
	end
end

local function initialise()
	--Initialise Flux Gates
	inFlux.setFlowOverride(0)
	outFlux.setFlowOverride(0)
	inFlux.setOverrideEnabled(true)
	outFlux.setOverrideEnabled(true)

opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
	--Initialise Monitor
	if CC then
		if monitor == nil then 
			print("setting monitor to term") 
			monitor = term 
		else	
			monitor.setTextScale(1)
		end
	elseif OC then
		monitor.setResolution(50, 12)
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
	else
		--Doh, we have no recognised OS
	end
	print("Monitor initialised")
	
	monitor.clear()
	printStatic(scrnStatic.main)

--redirect std out to monitor
	if monitor ~= term and CC then
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
		term.redirect(monitor)		--redirct all future std out to monitor instead of local computer screen
	end
	
	-- open modem on listen channel
	modem.open(modemRx)

print("request initial reactor info")
	callReactor('getReactorInfo')
	local try = 0

opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller
	--Loop until we get a response from reactor modem or have info.* 
	while info.status == nil do
		monitor.setCursorPos(1, 2)
		try = try + 1
		monitor.write("waiting for response from reactor modem Try:"..try)

local event, id, op1, op2, op3, op4, op5 = os.pullEvent()
		
		if type(eventHandler[event]) == 'function' then
			eventHandler[event](id, op1, op2, op3, op4, op5)
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
		else
			eventHandler['*'](event, id, op1, op2, op3, op4, op5)
		end
	end -- end while loop
	
	monitor.setBackgroundColor(colors.black)
	monitor.setCursorPos(1, 2)
	monitor.write(string.rep(" ", screenWidth))

end
opencomputers draconic reactor controller How to dowload it? opencomputers draconic reactor controller

local function main()
	--**************************
	--****** START MAIN ********
	--**************************
	--print("start main while loop")
	while true do
		--print("wait for the timer event or some other event")
		local event, id, op1, op2, op3, op4, op5 = os.pullEvent()
		
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
		if type(eventHandler[event]) == 'function' then
			eventHandler[event](id, op1, op2, op3, op4, op5)
		else
			eventHandler['*'](event, id, op1, op2, op3, op4, op5)
		end
	end -- end while true loop
end

-- initialise()
-- main()
opencomputers draconic reactor controller How to get it? opencomputers draconic reactor controller

local errNo, errMsg = pcall(initialise)
errorHandler(errNo, errMsg)
if errNo then
	local errNo, errMsg = pcall(main)
	errorHandler(errNo, errMsg)
end

--Reset the stupid OpenComputers screen
if OC then
opencomputers draconic reactor controller How to use it? opencomputers draconic reactor controller
	monitor.resetResolution()
end
opencomputers draconic reactor controller

Paste Settings

Paste Title : [Optional]

Paste Folder : [Optional]

Syntax Highlighting : [Optional]

Paste Expiration : [Optional]

Paste Status : [Optional]

Password : [Optional]

Description: [Optional]

Tags: [Optional]

Encrypt Paste (?)

You are currently not logged in, this means you can not edit or delete anything you paste. Sign Up or Login

Recent Pastes

rapidgator hypnosis
Plaintext | 0 | 12 seconds ago
fancutfags
Plaintext | 0 | 12 seconds ago
fly noclip script r15
Plaintext | 0 | 13 seconds ago
can pastebin links log ips
Plaintext | 0 | 13 seconds ago
ffxi pld lua
Plaintext | 0 | 14 seconds ago
roblox minecraft script
Plaintext | 1 | 5 minutes ago
ro boxing script
Plaintext | 1 | 5 minutes ago

Paste Settings

Site Languages