PasteShr

New Paste Browse

how to change usb0 to eth0 in pwnagotchi
sudo apt-key adv --keyserver hkp://pgp.mit.edu --recv-keys 11764EE8AC24832F
sudo apt install raspberrypi-ui-mods
sudo apt install chromium-browser

Installing the Fan SHIM software
git clone https://github.com/pimoroni/fanshim-python
cd fanshim-python
sudo ./install.sh
cd examples
sudo ./install-service.sh --on-threshold 65 --off-threshold 55 --delay 2

how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
To install the PiSugar2 power management scripts/dependencies:

curl http://cdn.pisugar.com/release/Pisugar-power-manager.sh | sudo bash

The script will ask you to select which model of PiSugar2 you have and then finish. After that you can start accessing the PiSugar2’s web interface. It will tell you the address at the end of the script like this:

Clean up
Now navigate to http://0.0.0.0:8421 on your browser to see PiSugar power management

*** Pwnagotchi Build Guide ***
how to change usb0 to eth0 in pwnagotchi How to dowload it? how to change usb0 to eth0 in pwnagotchi
# Description:
# My collective notes for building my pwnagotchi
#
# Last Updated: April 2022

*** Hardware: ***
   * Raspberry Pi 4b
   * Waveshare 3.7 e-ink display
   * PiSugar 3 Plus 5000 mAh UPS
   * Panda Wireless PAUN09 Wifi Adapter
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
   * DIYmall VK-172 USB GPS Dongle (U-blox 7)
   * Samsung EVO Micro SDXC 256GB (UHD, UHS-I, U3, A2, V30)

*** Kudos and Special Thanks: ***
# Reddit User "u/panoptyk", for their "Guerrilla guide to Pwnagotchi [v1.5.5/2022]:
#   Link: https://www.reddit.com/r/pwnagotchi/comments/sl2rv1/guerrilla_guide_to_pwnagotchi_v1552022/?utm_source=share&utm_medium=web2x&context=3
#
# Junohea (Wark#8463) on the "Pwnagotchi Unofficial" Discord, for their guidance on configuring an external wifi adapter.
# 
# Reddit User "u/Capt_Panic" on Reddit and Discord, for their contributions to this guide.
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
#	Link: https://www.reddit.com/r/pwnagotchi/comments/ubnlde/comment/i6gg8sj/?utm_source=share&utm_medium=web2x&context=3
#
# The Pwnagotchi Reddit Community:
#   Link: https://www.reddit.com/r/pwnagotchi/
#
# The "Pwnagotchi Unofficial" Discord Community:
#   Link: https://discord.gg/8fV5Ka32
#
# GaelicThunder on GitHub, for their Exp Plugin:
#   Link: https://github.com/GaelicThunder/Experience-Plugin-Pwnagotchi
how to change usb0 to eth0 in pwnagotchi How to get it? how to change usb0 to eth0 in pwnagotchi
#
# Hanna.Diamond on GitHub, for their Age Plugin and Waveshare 3.7" e-ink display Plugin:
#   Link: https://github.com/hannadiamond/pwnagotchi-plugins

*** Build Instructions Below: ***

Step 1) Download Pwnagotchi image from pwnagotchi.ai
 #      Note: version 1.5.5 is the latest version as of April 2022
 #            Many have recommended instead to flash version 1.5.3
 #            in order to avoid reported bugs regarding AI mode not starting.
how to change usb0 to eth0 in pwnagotchi How to use it? how to change usb0 to eth0 in pwnagotchi
 #            once installed, version 1.5.3 will automatically update to 1.5.5
 #            with an established internet connection (host connection sharing or bt-tether)
 Download version 1.5.3 to avoid having to fix AI Mode. 
     # Remediation guidance for v1.5.5 AI Mode bug is available from u/panoptyk on Reddit. See Link in Kudos section above.

Step 2) Flash pwnagotchi image to microSD.
 #      Note: Recommended to use "balenaEtcher" to flash the image.
 #            Several tutorials exist online (Google or YouTube) that
 #            provide instructions for flashing an image to a microSD.

how to change usb0 to eth0 in pwnagotchi How to dowload it? how to change usb0 to eth0 in pwnagotchi
Step 3) Build your initial config.toml
 #      Note: your initial config.toml will contain the baseline configuration
 #            for your pwnagotchi, such as the name of the device. It is recommended to avoid
 #            trying to configure all of your plugins at this stage, and only focus on the 
 #            essential plugins, such as 'bt-tether'.

######## start of config.toml ########

#Main settings
main.name = "pwnagotchi"
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
main.lang = "en"
main.custom_plugins = "/usr/local/share/pwnagotchi/custom-plugins/"
main.whitelist = [
  "Other...",
]

#Reporting results to PwnGRID
main.plugins.grid.enabled = true
main.plugins.grid.report = true
main.plugins.grid.exclude = [
how to change usb0 to eth0 in pwnagotchi PasteShr how to change usb0 to eth0 in pwnagotchi
  "Other..."
]

#Display configuration
ui.display.enabled = false #set to false for now
ui.display.type = "waveshare37inch" #"waveshare37inch" doesn't exist (yet). To be created later...
ui.display.color = "black"

#Reduce Writes to preserve SD Lifespan
fs.memory.enabled = true
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
fs.memory.mounts.log.enabled = true
fs.memory.mounts.data.enabled = true

#bt-tether settings
main.plugins.bt-tether.enabled = true
main.plugins.bt-tether.devices.ios-phone.enabled = true
main.plugins.bt-tether.devices.ios-phone.search_order = 1
main.plugins.bt-tether.devices.ios-phone.mac = "CH:AN:GE:XX:MM:EE" #mobile Bluetooth MAC
main.plugins.bt-tether.devices.ios-phone.ip = "172.20.10.6" #custom static IP for iPhone PAN
main.plugins.bt-tether.devices.ios-phone.netmask = 24
how to change usb0 to eth0 in pwnagotchi How to use it? how to change usb0 to eth0 in pwnagotchi
main.plugins.bt-tether.devices.ios-phone.interval = 1
main.plugins.bt-tether.devices.ios-phone.scantime = 10
main.plugins.bt-tether.devices.ios-phone.max_tries = 10
main.plugins.bt-tether.devices.ios-phone.share_internet = true
main.plugins.bt-tether.devices.ios-phone.priority = 1

######## end of config.toml ########

Step 4) Copy config.toml to MicroSD (boot)
 #       Note: Insert the microSD card flashed in Step 3.
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
 Open the new drive titled "boot", and copy over your config.toml

Step 5) Boot pwnagotchi for the first time, connected via USB (will boot into MANU Mode).
 #       WARNING: BE PATIENT. The First boot will take longer than average due to key generation.
 #       NOTE: If you specified settings for bt-tether plugin, ensure your mobile device is
 #             nearby and listening for new bluetooth devices to pair. 
 #             Ensure Internet sharing via Personal Hotspot is enabled.
 Your mobile device will be prompted to pair with your pwnagotchi.

Step 6) Configure host Internet sharing (macOS) 
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
 # This guide will cover host internet sharing for macOS only. Windows host internet sharing is available from u/panoptyk on Reddit. See Link in Kudos section above.
 # ETH0 Instructions for Internet access via onboard ethernet port can be found via the following link, thanks to u/Capt_Panic on Reddit: https://reddit.com/r/pwnagotchi/comments/ucig3u/configuring_pi_3_b_for_pnwagotchi_for_nic/
 ** On pwnagotchi: **
  ssh pi@10.0.0.2
     # type "yes" if prompted to accept the ssh key for this not-yet known host.
     # default password: "raspberry" (to be changed later)
     # Note: If you receive "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!":
           # This is due to a previous ssh entry conflicting with your pwnagtochi's IP/hostname.
           sudo nano /Users/{user}/.ssh/known_hosts
           # comment-out or delete lines resembling your raspberry pi IP or hostname
how to change usb0 to eth0 in pwnagotchi PasteShr how to change usb0 to eth0 in pwnagotchi

sudo nano /etc/resolv.conf
       # modify "nameserver 127.0.0.1" to be "nameserver 1.1.1.1"

sudo nano /etc/network/interfaces.d/usb0-cfg
       # add "dns-nameservers 1.1.1.1" under the gateway line"

sudo nano /etc/dnsmasq.conf
       # add "server=1.1.1.1@usb0"

how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
  sudo systemctl disable dnsmasq

sudo chattr +i /etc/resolv.conf
      # make file immutable

** On host macOS system: **
      # Manually configure network device (RNDIS/Ethernet Gadget) IPv4 to support
      # default IP addressing.
        "IPv4 Address: 10.0.0.1"
        "Subnet Mask: 255.255.255.0"
how to change usb0 to eth0 in pwnagotchi PasteShr how to change usb0 to eth0 in pwnagotchi
        "Router: 10.0.0.1"

sudo ./macos_connection_share.sh 
      # Note: Internet sharing scripts obtained from pwnagotchi.ai. 
      #       More scripts are available for Windows and Linux OS at pwnagotchi.ai
      #
      # The Raspberry Pi 4b comes equiped with a Ethernet Port, allowing most users the ability to directly connect 
      # their pwnagotchi to their home router, or to their computer via the CAT 5 port. This is a far simpler method
      # of obtaining internet access than the instructions I provide below. However, if you are like me, the method below 
      # provides you the ability to quickly connect your rpi to your comptuer on-the-go via a USB C cable.
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
      #
      # Troubleshooting:
        Unable to ping 1.1.1.1 from pwnagotchi with macOS host sharing:
      	# "sudo pfctl -sn" may sometimes report the following:
          # nat on en0 inet from 10.0.0.0/24 to any -> (en0) round-robin
          # Fix via: "sudo echo "nat on en0 from en6:network to any -> en0" | sudo pfctl -f -"
          # The above cmd sets proper nat direction (rather than round-robin DNS).

Step 7) Install waveshare 3.7 e-ink display
 cd ~
how to change usb0 to eth0 in pwnagotchi How to use it? how to change usb0 to eth0 in pwnagotchi
 sudo mkdir /usr/local/share/pwnagotchi/custom-plugins/ 
      #make custom-plugins directory defined in config.toml, if not done so already.
      
 sudo mkdir /usr/local/lib/python3.7/dist-packages/pwnagotchi/ui/hw/libs/waveshare/v37inch
 
 sudo git clone https://github.com/hannadiamond/pwnagotchi-plugins.git
 
 cd ./pwnagotchi-plugins/waveshare_37inch/
 
 sudo cp -r /home/pi/pwnagotchi-plugins/waveshare_37inch/v37inch/. /usr/local/lib/python3.7/dist-packages/pwnagotchi/ui/hw/libs/waveshare/v37inch
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
 
 sudo cp waveshare37inch.py /usr/local/lib/python3.7/dist-packages/pwnagotchi/ui/hw
 
 sudo nano /etc/pwnagotchi/config.toml
      #set: ui.display.enabled = true
      #set: ui.display.type = "waveshare37inch"
 
 sudo nano /usr/local/lib/python3.7/dist-packages/pwnagotchi/utils.py
 #Locate "def load_config" and add the following:
 elif config['ui']['display']['type'] in ('ws_37inch', 'ws37inch', 'waveshare_37inch', 'waveshare37inch'):
how to change usb0 to eth0 in pwnagotchi How to dowload it? how to change usb0 to eth0 in pwnagotchi
    config['ui']['display']['type'] = 'waveshare37inch'
 
 sudo nano /usr/local/lib/python3.7/dist-packages/pwnagotchi/ui/display.py
 #Add the following:
 def is_waveshare37inch(self):
   return self.implementation.name == 'waveshare37inch'
 
 sudo nano /usr/local/lib/python3.7/dist-packages/pwnagotchi/ui/components.py
 #Locate "class LabeledValue" and REPLACE "def draw" with:
     def draw(self, canvas, drawer):
how to change usb0 to eth0 in pwnagotchi PasteShr how to change usb0 to eth0 in pwnagotchi
        if self.label is None:
            drawer.text(self.xy, self.value, font=self.label_font, fill=self.color)
        else:
            pos = self.xy
            drawer.text(pos, self.label, font=self.label_font, fill=self.color)
            drawer.text((pos[0] + self.label_spacing + self.label_font.getsize(self.label)[0], pos[1]), self.value, font=self.text_font, fill=self.color)
 
 sudo nano /usr/local/lib/python3.7/dist-packages/pwnagotchi/ui/hw/__init__.py
 #Add the following:
 from pwnagotchi.ui.hw.waveshare37inch import Waveshare37inch
how to change usb0 to eth0 in pwnagotchi How to dowload it? how to change usb0 to eth0 in pwnagotchi
 #Also, add the following into the elif block of the code:
 elif config['ui']['display']['type'] == 'waveshare37inch':
    return Waveshare37inch(config)
    
 sudo systemctl restart pwnagotchi.service #to initialize new waveshare 3.7 display. 
    # Troubleshooting: If the screen does not come on: 
    # Just SSH into your pwnagotchi via USB and check your work from the beginning of step 7.
    # I typically add the waveshare37 code snippets right between the sections for "waveshare27" and 
    # "waveshare29" in their respective sections within each script being modified.

how to change usb0 to eth0 in pwnagotchi How to dowload it? how to change usb0 to eth0 in pwnagotchi
Step 8) Install & Configure Wireless adapter
 lsusb #ensure wifi adapter is plugged in and detected
 iw dev #ensure wlan1 is observed with mon0 under phy#1
 sudo nano /boot/config.txt
   # Find the following line:
     # Additional overlays and parameters are documented /boot/overlays/README
   # Add the following line under it:
     dtoverlay=disable-wifi #disables the onboard wifi, allowing our adapter to operate as wlan0

sudo nano /usr/bin/pwnlib
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
 #locate and replace the contents of "start_monitor_interface with the following:
   #rename adapter and bring up as mon0 in monitor mode
   ip link set wlan0 down
   ip link set wlan0 name mon0
   iw dev mon0 set type monitor
   ip link set mon0 up
   #add a mon1 interface from the same adapter
   iw phy "$(iw phy | head -1 | cut -d" " -f2)" interface add mon1 type monitor
   
 sudo nano /etc/systemd/system/pwngrid-peer.service
how to change usb0 to eth0 in pwnagotchi How to use it? how to change usb0 to eth0 in pwnagotchi
  # update the service launch param. Replace "mon0" with "mon1"
  # Everything else continues to use mon0, bettercap accepts it and works fine. Pwngrid works fine on the mon1 interface.
 
 sudo reboot #allow all changes to take affect.

Step 9) Install custom plugins 
 #Consider this step OPTIONAL, unless you would like these custom plugins. Otherwise, proceed to Step 10.
 cd ~
 sudo mkdir /usr/local/share/pwnagotchi/custom-plugins/ 
      #make custom-plugins directory defined in config.toml, if not done so already.
how to change usb0 to eth0 in pwnagotchi How to get it? how to change usb0 to eth0 in pwnagotchi
 
 Step 9.1) aircrackonly plugin
  sudo pwnagotchi plugins install aircrackonly
  sudo nano /etc/pwnagotchi/config.toml
       # add the following lines to config.toml:
         main.plugins.aircrackonly.enabled = true
         main.plugins.aircrackonly.face = "(>.<)"
        
 Step 9.2) Exp plugin #Generates an "experiance" level and progress bar for your pwnagotchi.
  #Copy exp.py from git: https://github.com/GaelicThunder/Experience-Plugin-Pwnagotchi
how to change usb0 to eth0 in pwnagotchi PasteShr how to change usb0 to eth0 in pwnagotchi
  sudo nano /usr/local/share/pwnagotchi/custom-plugins/exp.py #paste contents of exp.py from github to exp.py on your pwnagotchi.
  sudo nano /etc/pwnagotchi/config.toml
  #add the following to your config.toml. Please note that the positions have been adjusted to accomodate the waveshare 3.7 display.
    main.plugins.exp.enabled = true
	main.plugins.exp.lvl_x_coord = 0
	main.plugins.exp.lvl_y_coord = 210
	main.plugins.exp.exp_x_coord = 0
	main.plugins.exp.exp_y_coord = 228
 
 Step 9.3) Age plugin #Generates the pwnagotchi's "age" and "strength".
how to change usb0 to eth0 in pwnagotchi How to use it? how to change usb0 to eth0 in pwnagotchi
  #Copy exp.py from git: https://github.com/hannadiamond/pwnagotchi-plugins/blob/main/plugins/age.py
  sudo nano /usr/local/share/pwnagotchi/custom-plugins/age.py #paste contents of exp.py from github to exp.py on your pwnagotchi.
  sudo nano /etc/pwnagotchi/config.toml
  #add the following to your config.toml. Please note that the positions have been adjusted to accomodate the waveshare 3.7 display.
    main.plugins.age.enabled = true
	main.plugins.age.age_x_coord = 0
	main.plugins.age.age_y_coord = 56
	main.plugins.age.str_x_coord = 125
	main.plugins.age.str_y_coord = 56
    
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
 Step 9.4) GPS plugin #Uses the Ublox-7 USB GPS dongle to capture the GPS coordinates for a collected handshake. 
 	#NOTE: Many people believe the GPS plugin should always communicate the current GPS coordinates. This is not true. the GPS coordinates will only update on the display when a handshake has been obtained. 
    #Troubleshooting: If the GPS dongle does not appear to be functioning, it is likely that the device is unable to capture a location (or has yet to capture a handshake. Try changing your physical location (i.e. go outside, walk around the house, down the street, etc). 
  lsusb #confirm the gps dongle is detected as plugged in.
  sudo pwnagotchi plugins install gps
  sudo nano /etc/pwnagotchi/config.toml
  #add the following to your config.toml. Please note that the positions have been adjusted to accomodate the waveshare 3.7 display.
  	main.plugins.gps.enabled = true
	main.plugins.gps.speed = 19200
	main.plugins.gps.device = "/dev/ttyACM0" #gps dongle location
how to change usb0 to eth0 in pwnagotchi How to dowload it? how to change usb0 to eth0 in pwnagotchi
	main.plugins.gps.position = "225,194" #adjusted to support waveshare 3.7
	main.plugins.gps.linespacing = 18 #adjusted to support waveshare 3.7
    
 Step 9.5) PiSugar Plugin 
  #Ensure PiSugar Power Manager is installed:
  curl http://cdn.pisugar.com/release/Pisugar-power-manager.sh | sudo bash
  cd /usr/local/share/pwnagotchi/custom-plugins/
  sudo nano pisugar2.py
  #locate and modify the following contents of 'def on_ui_setup':
  	    def on_ui_setup(self, ui):
how to change usb0 to eth0 in pwnagotchi PasteShr how to change usb0 to eth0 in pwnagotchi
        ui.add_element(
            "bat",
            LabeledValue(
                color=BLACK,
                label="BAT",
                value="0%",
                position=(ui.width() / 2 + 30, 0),
                label_font=fonts.Bold,
                text_font=fonts.Medium,
            ),
how to change usb0 to eth0 in pwnagotchi How to get it? how to change usb0 to eth0 in pwnagotchi
        )
  
 Step 9.6) memtemp Plugin
  sudo pwnagotchi plugins install memtemp
  sudo nano /etc/pwnagotchi/config.toml
  #add the following to your config.toml. Please note that the positions have been adjusted to accomodate the waveshare 3.7 display.
    main.plugins.memtemp.enabled = true
	main.plugins.memtemp.scale = "celsius"
	main.plugins.memtemp.orientation = "vertical" #adjusted for preference on waveshare 3.7
	main.plugins.memtemp.position = "382,194" #adjusted to support waveshare 3.7
how to change usb0 to eth0 in pwnagotchi How to get it? how to change usb0 to eth0 in pwnagotchi
	main.plugins.memtemp.linespacing = 18 #adjusted to support waveshare 3.7
    
 Step 9.7) customize bt-tether display position #to accomodate waveshare 3.7
  cd /usr/local/lib/python3.7/dist-packages/pwnagotchi/plugins/default 
  sudo nano bt-tether.py
  #locate and modify the following under 'def pn_ui_setup':
  	def on_ui_setup(self, ui):
        with ui._lock:
            ui.add_element('bluetooth', LabeledValue(color=BLACK, label='BT', value='-', position=(ui.width() / 2 - 28$
                           label_font=fonts.Bold, text_font=fonts.Medium))
how to change usb0 to eth0 in pwnagotchi PasteShr how to change usb0 to eth0 in pwnagotchi
    
  sudo systemctl restart pwnagotchi.service #reload pwnagotchi with new plugins
 
Step 10) Update everything. #OPTIONAL. I'm just obsessive about updating everything...
 sudo pwnagotchi plugins update 
 sudo pwnagotchi plugins upgrade
 sudo apt-get update --allow-releaseinfo-change
      #Troubleshooting: Some repos for "re4son-kernel.com/re4son kali-pi" might present an error resembling the following: "The following signatures were invalid: EXPKEYSIG 11764EE8AC24832F Carsten Boeving <carsten.boeving@whitedome.com.au>"
      wget -O - https://re4son-kernel.com/keys/http/archive-key.asc | sudo apt-key add -

how to change usb0 to eth0 in pwnagotchi How to get it? how to change usb0 to eth0 in pwnagotchi
 sudo apt-get upgrade #This will take a while (~45 minutes). Be patient.
      #Troubleshooting: You might encounter an error that looks similar to:
      # Errors were encountered while processing:
      #  /var/cache/apt/archives/kalipi-kernel_5.4.83-20211204_armhf.deb
      # E: Sub-process /usr/bin/dpkg returned an error code (1)
         sudo mv /boot/overlays/ overlaysbackup #rename the existing overlays in /boot/. The renamed overlays can be safely deleted later
         sudo apt-get upgrade #attempt upgrade again.

Step 11) Change all the default passwords
how to change usb0 to eth0 in pwnagotchi How to use it? how to change usb0 to eth0 in pwnagotchi
 # Change "pi" password. Default "raspberry"
 psswd
 
 # Change "root" password:
 sudo su
 psswd
 
 # Change pwnagotchi Web UI password. Default "changeme"
 sudo nano /etc/pwnagotchi/config.toml
  # locate and update the values for:
how to change usb0 to eth0 in pwnagotchi How to get it? how to change usb0 to eth0 in pwnagotchi
    ui.web.username = "changeme"
    ui.web.password = "changeme"
 
 # Update bettercap password. Default "pwnagotchi"
 sudo nano /etc/pwnagotchi/config.toml
  # locate and update the values for:
    bettercap.username = "pwnagotchi"
    bettercap.password = "pwnagotchi"
  sudo nano /usr/local/share/bettercap/caplets/pwnagotchi-auto.cap 
    #modify the bettercap username & password to match config.toml
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi
  sudo nano /usr/local/share/bettercap/caplets/pwnagotchi-manual.cap
    #modify the bettercap username & password to match config.toml
 
 sudo systemctl restart pwnagotchi.service #reload pwnagotchi for config changes to apply.
    
Step 12) Back up all your hard work!
 Download the Backup script from Github.
 # Link: https://github.com/evilsocket/pwnagotchi/blob/master/scripts/backup.sh
 
 Append the "FILES_TO_BACKUP" section of the backup script to include the following additional files that have been added or modified as a result of this guide:
how to change usb0 to eth0 in pwnagotchi How to use it? how to change usb0 to eth0 in pwnagotchi

/usr/bin/pwnlib \
  /etc/systemd/system/pwngrid-peer.service \
  /usr/local/share/pwnagotchi/custom-plugins/ \
  /usr/local/lib/python3.7/dist-packages/pwnagotchi/ui/hw/libs/waveshare/v37inch/ \
  /usr/local/lib/python3.7/dist-packages/pwnagotchi/ui/hw/waveshare37inch.py \
  /usr/local/lib/python3.7/dist-packages/pwnagotchi/utils.py \
  /usr/local/lib/python3.7/dist-packages/pwnagotchi/ui/display.py \
  /usr/local/lib/python3.7/dist-packages/pwnagotchi/ui/components.py \
  /usr/local/lib/python3.7/dist-packages/pwnagotchi/ui/hw/__init__.py
how to change usb0 to eth0 in pwnagotchi How to get it for free? how to change usb0 to eth0 in pwnagotchi

# Note: The last entry in the list must include an end quotation mark. Be sure to relocate this to the end of the list before saving.
  
  sudo chmod +x backup.sh # make backup.sh executable
  sudo ./backup.sh

#### Enjoy your new Pwnagotchi, and please support the Pwnagotchi community on Reddit and Discord! ####

Step 13) [OPTIONAL] Accessing your handshakes
#### Additional Optional step, curtosy of /u/Capt_Panic on Reddit and Discord #### 
how to change usb0 to eth0 in pwnagotchi How to use it? how to change usb0 to eth0 in pwnagotchi
	#Reference: https://www.reddit.com/r/pwnagotchi/comments/ubnlde/comment/i6gg8sj/?utm_source=share&utm_medium=web2x&context=3
    
#create file to access handshakes
 sudo nano cph.sh
 #insert these lines into the file
	\#/bin/bash

cp -r /root/handshakes/\* /home/pi/handshakes/

chown pi:pi /home/pi/handshakes
how to change usb0 to eth0 in pwnagotchi How to get it? how to change usb0 to eth0 in pwnagotchi

chown pi:pi /home/pi/handshakes/\*
 sudo chmod +x cph.sh
	#To run file, execute 'sudo cph.sh'. This will copy your handshakes into the /home/pi/handshakes directory

Step 14) [OPTIONAL] May be required if you are having troubles with bluetooth
#### Additional Optional step, curtosy of /u/Capt_Panic on Reddit and Discord #### 
	#Reference: https://www.reddit.com/r/pwnagotchi/comments/ubnlde/comment/i6gg8sj/?utm_source=share&utm_medium=web2x&context=3

# We need to add something into our profile which is in our root directory, hidden.
how to change usb0 to eth0 in pwnagotchi How to use it? how to change usb0 to eth0 in pwnagotchi
 sudo su
 cd /root
 sudo nano ~/.profile
 #add the following at the bottom of the file.
 \# attempt to restart bluetooth

sudo systemctl restart bluetooth
 #save using crtl + x and then hit enter.
 #Comment out an if-else-statement.
 sudo nano /usr/bin/btuart
how to change usb0 to eth0 in pwnagotchi How to get it? how to change usb0 to eth0 in pwnagotchi
 #At the first if-else-statement you see, comment it out like you you see below.
 \#if grep -q "raspberrypi,4" /proc/device-tree/compatible; then

BDADDR=

\#else

SERIAL='cat /proc/device-tree/serial-number | cut -c9-'

B1='echo $SERIAL | cut -c3-4'
how to change usb0 to eth0 in pwnagotchi How to use it? how to change usb0 to eth0 in pwnagotchi

B2='echo $SERIAL | cut -c5-6'

B3='echo $SERIAL | cut -c7-8'

BDADDR='printf b8:27:eb:%02x:%02x:%02x $((0x$B1 \^ 0xaa)) $((0x$B2 \^ 0xaa)) $((0x$B3 \^ 0xaa))'

\#fi
 #save it using crtl + x and then hit enter.
 sudo reboot
how to change usb0 to eth0 in pwnagotchi How to get it? how to change usb0 to eth0 in pwnagotchi
how to change usb0 to eth0 in pwnagotchi

Paste Settings

Paste Title : [Optional]

Paste Folder : [Optional]

Syntax Highlighting : [Optional]

Paste Expiration : [Optional]

Paste Status : [Optional]

Password : [Optional]

Description: [Optional]

Tags: [Optional]

Encrypt Paste (?)

You are currently not logged in, this means you can not edit or delete anything you paste. Sign Up or Login

Recent Pastes

mentalist season 1 720p torrent
Plaintext | 0 | 4 minutes ago
ossn premium nulled
Plaintext | 0 | 4 minutes ago
0x807a1007 windows 10
Plaintext | 0 | 4 minutes ago
reviews chockcatalog
Plaintext | 0 | 4 minutes ago
uhnv bobblehunt fix
Plaintext | 0 | 4 minutes ago
magnum-ott.net client_area
Plaintext | 0 | 9 minutes ago
saber sim auto farm
Plaintext | 0 | 9 minutes ago

Paste Settings

Site Languages