PasteShr

New Paste Browse

gmod e2 create ballsockets
@name bfw_v6(with arms?)
@inputs ADV:wirelink X Y
@outputs SetYaw BoostFX Debug
#inputs
@persist For Back Right Left FiltX FiltY Jump Boost Crouch Pod:entity Swap Active
#entities
@persist Tot:array
@persist [Torso Hip]:entity Feet:array Arm:array FeetC TotL
@persist [TorsoMDL HipMDL FootMDL ArmMDL]:string
#vectors
#-held information
gmod e2 create ballsockets How to get it? gmod e2 create ballsockets
@persist [LatD RigD UpD CamD]:vector
#-position
@persist [HSP FLSP FRSP]:vector FSP:array
@persist [HCP FLCP FRCP]:vector FCP:array
@persist [HOP FLOP FROP]:vector FOP:array LAS:array
@persist [HAP LAP CAP]:array
#-direction
@persist [HipHeld HipCur]:quaternion
@persist [TorsoHeld TorsoCur]:quaternion
#-walking
gmod e2 create ballsockets PasteShr gmod e2 create ballsockets
@persist [LefA RigA]:vector
@persist [HipPos HipVel Adjusted ForceVec]:vector
#numbers
#-stepsize stuff
@persist MaxH StepS ThrM Time Perc CrouchAmount
#-torso/hip force
@persist HipNat FootHoldForce
#-jumping bidness
@persist JumpForce JTGL Tow:vector
#-Sound Bools
gmod e2 create ballsockets PasteShr gmod e2 create ballsockets
@persist SCH Jpit Spit Rpit Dpit [JumpSND StepSND RunSND DeadSND]:string
@persist ALIVE SC:vector TrimTorso TrimHip VMul Accm Acceleration Thresh
@persist ARMFRC ARMDIST RUSHSND:string RUSHPITCH BOOSTFRC MTVEL TILTANG
@persist RUSHINC
#-Boost BS
@persist BoostBut BoostTGL BoostVec:vector
#temporary values
@persist N TempE:entity TempS:string TempD:vector TotMass Q JFlag
@trigger

gmod e2 create ballsockets PasteShr gmod e2 create ballsockets
if(dupefinished())
{
    reset()
}

if(first())
{
    #HELLO AND WELCOME TO THE BASIC WALKING CHIP
    #I AM YOUR HOST SESTZE
    
gmod e2 create ballsockets How to use it? gmod e2 create ballsockets
    #SO RIGHT, MY SUGGESTION FOR BALLSOCKETS IS AS FOLLOWS
    #BETWEEN HIP and FEET, use -0.1 to 0.1 for X, Y, and Z, with FREE MOVEMENT CHECKED
    #Between the LOWER LEG and FOOT, use the BALLSOCKET CENTER TOOL or use BALLSOCKET LINEDRAW
    #Between the UPPER and LOWER LEG, use -45 to 45 or so for X, it seems to work. -0.1 to 0.1 for the others
    #Between the HIP and UPPER LEG, use -45 to 45 X or so, and -35 to 35 Y, or so. -0.1 to 0.1 for Z
    #BETWEEN THE HIP AND TORSO USE BALLSOCKET CENTER ON THE TORSO TO THE HIP
    #THEN LIMIT IT'S ROTATION BY APPLYING AN ADVANCED BALLSOCKET WITH -45 to 45 X, -0.1 to 0.1 Y AND Z WITH FREE MOVMENT CHECKED BETWEEN THEM
    #NEED AN EYEPOD WITH CUMULATIVE OUTPUT, Ymin -180, ymax 180, xmin 0, xmax 0
    #NEED AN ADVANCED POD CONTROLLER, USE THE WIRELINK CREATOR TO MAKE IT A WIRELINK
    #THAT'S ABOUT IT. HAVE FUN!
gmod e2 create ballsockets How to use it? gmod e2 create ballsockets
    
    #it now supports any number of legs - if you're using this for ACF,
    #I think it'd be balanced to get an extra 3 tons worth of armor for
    #every leg beyond 2 you have. So:
    #2 legs - 20t
    #3 legs - 23t
    #4 legs - 26t
    #etc, etc, etc.
    
    #place models here!
gmod e2 create ballsockets PasteShr gmod e2 create ballsockets
    TorsoMDL = "models/props_c17/Lockers001a.mdl"
    HipMDL = "models/props_c17/furnitureStove001a.mdl"
    FootMDL = "models/props_c17/FurnitureWashingmachine001a.mdl"
    #Look, arms!
    ArmMDL = ""
    
    #place sounds here! use "<NONE>" for no sound
    Jpit = 80
    Spit = 60
    Rpit = 60
gmod e2 create ballsockets How to use it? gmod e2 create ballsockets
    Dpit = 100
    RUSHPITCH = 80
    JumpSND = "npc/waste_scanner/grenade_fire.wav"
    StepSND = "npc/antlion/shell_impact4.wav"
    RunSND = "npc/turret_wall/turret_loop1.wav"
    DeadSND = "ambient/levels/labs/electric_explosion2.wav"
    RUSHSND = "weapons/rpg/rocket1.wav"
    
    #Trims the strength of the active KUs
    TrimTorso = 0.25 #Torso
gmod e2 create ballsockets PasteShr gmod e2 create ballsockets
    TrimHip = 0.5 #Hip
    #Adjusts the step height of your robot. VMul * StepLength
    VMul = 1
    #Adjusts how fast the mech snaps to walking. This does not increase the overall
    #speed of your contraption if you make it really large. Just sayin'.
    Acceleration = 8
    
    #Adjusts the minimum threshold speed to move the mech
    Thresh = 2
    
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
    #Arm holding force and arm forward/backward jiggle during walk
    ARMFRC = 4
    ARMDIST = 20
    
    #boost stuff. ugh.
    BOOSTFRC = 30
    MTVEL = 1200
    TILTANG = 20
    RUSHINC = 80
    
gmod e2 create ballsockets How to get it for free? gmod e2 create ballsockets
    #the rest is done automagically
    timer("checkstuff", 500)
}

if(clk("checkstuff"))
{
    Tot = entity():getConstraints()
    Tot[Tot:count()+1, entity] = entity()
    N = 1
    TotMass = 0
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
    FeetC = 0
    MaxH = 0
    timer("firstchecks", 10)
}
if(clk("firstchecks"))
{
    while(perf() & (N <= Tot:count()))
    {
        TempE = Tot[N, entity]
        TempS = Tot[N, entity]:model():lower()
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
        if(!(TempE:parent()))
        {
            if(!Hip)
            {
                if(TempS == HipMDL:lower())
                {
                    Hip = TempE
                    print("Got Hip")
                    N = 1
                }
gmod e2 create ballsockets How to use it? gmod e2 create ballsockets
                else
                {
                    N++
                }
            }
            elseif(!Torso)
            {
                if(TempS == TorsoMDL:lower())
                {
                    Torso = TempE
gmod e2 create ballsockets How to use it? gmod e2 create ballsockets
                    print("Got Torso")
                    N = 1
                }
                else
                {
                    N++
                }
            }
            else
            {
gmod e2 create ballsockets How to get it? gmod e2 create ballsockets
                if(TempS == FootMDL:lower())
                {
                    FeetC++
                    print("Foot " + FeetC + " found")
                    Feet[FeetC, entity] = TempE
                    MaxH += TempE:massCenter():z()
                }
                if(TempS == ArmMDL:lower())
                {
                    Arm[Arm:count() + 1, entity] = TempE
gmod e2 create ballsockets PasteShr gmod e2 create ballsockets
                    print("Arm " + Arm:count() + " found")
                }
                N++
            }
        }
        else
        {
            Tot:remove(N)
        }
        if(!(TempE:parent()))
gmod e2 create ballsockets How to use it? gmod e2 create ballsockets
        {
            TotMass += TempE:mass()
        }
        
    }
    if(N <= Tot:count())
    {
        print(N + " Items Checked")
        timer("firstchecks", 100)
    }
gmod e2 create ballsockets How to get it? gmod e2 create ballsockets
    else
    {
        timer("secondchecks", 10)
    }
}
if(clk("secondchecks"))
{
    MaxH = abs(Hip:massCenter():z() - MaxH/FeetC)
    TotL = FeetC
    StepS = MaxH / 2.75
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
    if(StepS)
    {
        ThrM = 540/StepS
    }
    else
    {
        ThrM = 6
    }
    
    LatD = vec(0, 1, 0)
gmod e2 create ballsockets How to get it for free? gmod e2 create ballsockets
    RigD = vec(0, 0, -1):cross(LatD)
    UpD = vec(0, 0, 1)
    
    ForceVec = vec(0, 1, 0)
    
    Accm = 0.7
    
    HipHeld = inv(quat(Hip)) * quat(LatD, UpD)
    TorsoHeld = inv(quat(Torso)) * quat(LatD, UpD)
    
gmod e2 create ballsockets How to use it? gmod e2 create ballsockets
    N = 1
    HSP = vec()
    while(N <= FeetC)
    {
        TempD = (Hip:massCenter() - Feet[N, entity]:massCenter())
        FSP[N, vector] = TempD:dot(LatD)*vec(1,0,0)+TempD:dot(RigD)*vec(0,1,0)+TempD:dot(UpD)*vec(0,0,1)
        HSP = (HSP * (N - 1) + (FSP[N, vector]))/N
        N++
    }
    
gmod e2 create ballsockets How to use it? gmod e2 create ballsockets
    N = 1
    while(N <= Arm:count())
    {
        TempD = (Arm[N, entity]:massCenter() - Torso:massCenter())
        HAP[N, vector] = TempD:dot(LatD)*vec(1, 0, 0) + TempD:dot(RigD) * vec(0, 1, 0) + TempD:dot(UpD) * vec(0, 0, 1)
        N++
    }
    
    HipNat = TotMass/Hip:mass() * 2/3
    FootHoldForce = HipNat
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
    
    JumpForce = TotMass/Torso:mass() * 7
    
    if(Hip & Torso & (FeetC > 1))
    {
        hint("Mech ready!", 3)
        timer("ntrvl", 20)    
    }
    else
    {
gmod e2 create ballsockets How to get it? gmod e2 create ballsockets
        hint("Error: missing bits! Please Refresh", 3)
    }
}

if(clk("ntrvl"))
{
    ALIVE = (Hip & Torso & (FeetC >= TotL))
    #Controls
    For = ADV["W", number]
    Back = ADV["S", number]
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
    Right = ADV["D", number]
    Left = ADV["A", number]
    FiltX = X/4
    FiltY = Y/4
    Jump = ADV["Space", number]
    Boost = ADV["Shift", number]
    Crouch = ADV["Alt", number]
    #BoostBut = ADV["Alt", number]
    Pod = ADV["Entity", entity]
    Swap = ADV["R", number]
gmod e2 create ballsockets How to get it? gmod e2 create ballsockets
    Active = ADV["Active", number]
    SetYaw = Active * 90
    CrouchAmount = clamp(CrouchAmount+((Crouch)-(!Crouch))*0.05, 0, 1)
    if(BoostBut & ($BoostBut > 0))
    {
        BoostTGL = !BoostTGL
        if(BoostTGL)
        {
            Pod:hintDriver("Boost Mode Enabled", 3)
            soundPlay(entity():id()+"rushloop", 0, RUSHSND)
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
            soundPitch(entity():id()+"rushloop", RUSHPITCH)
        }
        else
        {
            Pod:hintDriver("Boost Mode Disabled", 3)
            soundStop(entity():id()+"rushloop", 1.5)
        }
        BoostFX = BoostTGL
    }
    
gmod e2 create ballsockets How to get it? gmod e2 create ballsockets
    #Hip stuff
    
    HipPos = Hip:massCenter()
    HipVel = $HipPos
    #TIME
    Q = (abs(For - Back) | abs(Right - Left)) & (CrouchAmount == 0)
    ForceVec = ((For - Back) * LatD + (Right - Left) * RigD):normalized()
    if(Q)
    {
        ForceVec = ForceVec:normalized()
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
    }
    Adjusted = Accm*(HipVel:setZ(0) + ForceVec * Acceleration)
    Time = Time + clamp(Adjusted:length() * 360 / (StepS * 2 * pi()), 0, ThrM*(1.5)^Boost)
    L = (Adjusted:length() > Thresh)
    Perc = min(clamp(Perc + 0.1*(L-!L), 0, 1)*!JTGL + BoostTGL, 1)
    
    SCH = ((Time % (360/FeetC)) < 5) & (Q) & !JTGL & !BoostTGL
    if(SCH & ($SCH > 0) & (StepSND != "<NONE>"))
    {
        soundPlay(entity():id()+"step", 4, StepSND)
gmod e2 create ballsockets PasteShr gmod e2 create ballsockets
        soundPitch(entity():id()+"step", Spit-5+random(10))
    }
    
    #Vector Hibbetyjibbety
    LatD = vec(sin(FiltX), cos(FiltX), 0)
    RigD = vec(0, 0, -1):cross(LatD)
    CamD = vec(sin(FiltX)*cos(FiltY), cos(FiltX)*cos(FiltY), sin(FiltY))
    CamU = RigD:cross(CamD)
    
    #-hip/feet pos
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
    N = 1
    HCP = vec()
    while(N <= FeetC)
    {
        if(Feet[N, entity])
        {
            TempD = (Hip:massCenter() - Feet[N, entity]:massCenter())
            FCP[N, vector] = TempD:dot(LatD)*vec(1,0,0)+TempD:dot(RigD)*vec(0,1,0)+TempD:dot(UpD)*vec(0,0,1)
            TempD = FCP[N, vector] - FSP[N, vector]
            SC = ((Right | Left) & (!For & !Back)) * LatD*StepS*0.5
gmod e2 create ballsockets How to get it for free? gmod e2 create ballsockets
            LefA = (StepS*Perc*(Adjusted:normalized()*sin(Time+(360/FeetC)*N)+VMul*UpD*cos(Time+(360/FeetC)*N)) + SC*((N%2)==0) - SC*((N%2)==1)) * !BoostTGL
            #LefA = StepS*Perc*((For-Back)*LatD*sin(Time+(360/FeetC)*N)+(Right-Left)*RigD*sin(Time+(360/FeetC)*N)+VMul*UpD*cos(Time+(360/FeetC)*N)) + SC*((N%2)==0) - SC*((N%2)==1)
            LAS[N, vector] = FOP[N, vector]
            FOP[N, vector] = TempD:x()*LatD+TempD:y()*RigD+TempD:z()*UpD + LefA
            TempD = FOP[N, vector] - LAS[N, vector]
            Feet[N, entity]:applyForce((FOP[N, vector] + TempD * 2.5)*FootHoldForce*Perc*Feet[N, entity]:mass())
            HCP = (HCP * (N - 1) + FCP[N, vector])/N
            N++
        }
        else
gmod e2 create ballsockets How to use it? gmod e2 create ballsockets
        {
            FSP:remove(N)
            FCP:remove(N)
            LAS:remove(N)
            FOP:remove(N)
            Feet:remove(N)
            FeetC--
        }
    }
    TempD = ((HSP - vec(0, 0, CrouchAmount*MaxH*1/3)) - HCP)
gmod e2 create ballsockets How to get it? gmod e2 create ballsockets
    HOP = TempD:x()*LatD+TempD:y()*RigD+(TempD:z())*UpD
    #Arm holding
    N = 1
    while(N <= Arm:count())
    {
        #Jiggle = Perc * CamD * sin(Time + N / Arm:count() * 360) * ARMDIST
        Jiggle = Perc * LatD * sin(Time + N / Arm:count() * 360) * ARMDIST * !BoostTGL
        LAP[N, vector] = CAP[N, vector]
        TempQ = (Arm[N, entity]:massCenter() - Torso:massCenter())
        TempR = TempQ:dot(LatD)*vec(1, 0, 0) + TempQ:dot(RigD) * vec(0, 1, 0) + TempQ:dot(UpD) * vec(0, 0, 1)
gmod e2 create ballsockets How to get it? gmod e2 create ballsockets
        TempSr = HAP[N, vector] - TempR
        CAP[N, vector] = TempSr:x() * LatD + TempSr:y() * RigD + TempSr:z() * vec(0, 0, 1) + Jiggle
        #CAP[N, vector] = TempF:x() * CamD + TempF:y() * RigD + TempF:z() * CamU + Jiggle
        Delta = CAP[N, vector] - LAP[N, vector]
        Arm[N, entity]:applyForce(Arm[N, entity]:mass() * ARMFRC * (CAP[N, vector] + Delta * 2.5))
        N++
    }
    #Forces
    if(ALIVE)
    {
gmod e2 create ballsockets How to use it? gmod e2 create ballsockets
        TempD = ((For - Back) * LatD + (Right - Left) * RigD):normalized()
        BoostVec = (BoostVec * 0.9 + TempD * BOOSTFRC) * BoostTGL
        Hip:applyForce((HOP+$HOP*2.5 + BoostVec / HipNat)*HipNat*Hip:mass())
        
        Temp = RigD:cross(CamD)
    
        HipCur = quat(Hip) * HipHeld
        TorsoCur = quat(Torso) * TorsoHeld
        HTQ = quat()
        TTQ = quat()
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
        if(BoostTGL)
        {
            SoundLen = min((HipVel:setZ(0):length() * 20) / MTVEL * RUSHINC, RUSHINC)
            soundPitch(entity():id()+"rushloop", RUSHPITCH + SoundLen)        
            TiltLen = min((HipVel:setZ(0)):length() * 20 / MTVEL * TILTANG, TILTANG)
            
            HLV = Hip:toLocal(Hip:pos() + (HipVel:setZ(0)):normalized():cross(vec(0, 0, 1)))
            TLV = Torso:toLocal(Torso:pos() + (HipVel:setZ(0)):normalized():cross(vec(0, 0, 1)))
            HTQ = quat(LatD, vec(0, 0, 1)) * qRotation(HLV, -TiltLen)
            TTQ = quat(CamD, Temp) * qRotation(TLV, -TiltLen)
gmod e2 create ballsockets PasteShr gmod e2 create ballsockets
        }
        else
        {
            HTQ = quat(LatD, vec(0, 0, 1))
            TTQ = quat(CamD, Temp)
        }
        
        Hip:applyTorque(Hip:inertia() * TrimHip * 100 * (Hip:toLocal(Hip:pos()+rotationVector(HTQ/HipCur))*15-Hip:angVelVector()))
        Torso:applyTorque(Torso:inertia() * TrimTorso * 100 * (Torso:toLocal(Torso:pos()+rotationVector(TTQ/TorsoCur))*15-Torso:angVelVector()))
    }
gmod e2 create ballsockets How to use it? gmod e2 create ballsockets
    #Hopping
    if(Jump & ($Jump > 0) & !JTGL & !BoostTGL)
    {
        JTGL = 1
        if(JumpSND != "<NONE>")
        {
            soundPlay(entity():id()+"jump", 2.5, JumpSND)
            soundPitch(entity():id()+"jump", Jpit-10+random(20))
        }
        timer("stopjump", 200)
gmod e2 create ballsockets How to get it for free? gmod e2 create ballsockets
    }
    if(RunSND != "<NONE>")
    {
        if(Boost & ($Boost > 0))
        {
            soundPlay(entity():id()+"boost", 0, RunSND)
            soundPitch(entity():id()+"boost", Rpit-10+random(20))
        }
        if(!Boost & ($Boost < 0))
        {
gmod e2 create ballsockets PasteShr gmod e2 create ballsockets
            soundStop(entity():id()+"boost", 0.5)
        }
    }
    if(JTGL == 1)
    {
        TempD = CamD:cross(RigD) * -1
        Torso:applyForce(TempD * JumpForce * Torso:mass())
        Hip:applyForce(TempD * JumpForce * Hip:mass())
        N = 1
        while(N<=FeetC)
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
        {
            if(Feet[N, entity])
            {
                Feet[N, entity]:applyForce(TempD * JumpForce * Feet[N, entity]:mass())
                N++
            }
        }
    }
    #Check if I'm still alive!
    if(Hip & Torso & (FeetC >= TotL))
gmod e2 create ballsockets How to get it? gmod e2 create ballsockets
    {
        timer("ntrvl", 20)
    }
    else
    {
        Pod:hintDriver("Error: missing bits, probably destroyed! Shutting down.", 3)
        if(DeadSND != "<NONE>")
        {
            soundPlay(entity():id()+"dead", 0, DeadSND)
            soundPitch(entity():id()+"dead", Dpit)
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
        }
    }
}
if(clk("stopjump"))
{
    timer("resetjump", 2000)
    JTGL = 2
}
if(clk("resetjump"))
{
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
    JTGL = 0
}

if(last())
{
    soundStop(entity():id()+"boost")
    soundStop(entity():id()+"dead")
    soundStop(entity():id()+"jump")
    soundStop(entity():id()+"step")
}
gmod e2 create ballsockets How to dowload it? gmod e2 create ballsockets
gmod e2 create ballsockets

Paste Settings

Paste Title : [Optional]

Paste Folder : [Optional]

Syntax Highlighting : [Optional]

Paste Expiration : [Optional]

Paste Status : [Optional]

Password : [Optional]

Description: [Optional]

Tags: [Optional]

Encrypt Paste (?)

You are currently not logged in, this means you can not edit or delete anything you paste. Sign Up or Login

Recent Pastes

roblox wally's hub script free
Plaintext | 0 | 9 seconds ago
roblox wallys hub script free
Plaintext | 0 | 9 seconds ago
unnamed esp script
Plaintext | 0 | 10 seconds ago
ngu idle fibbonacci perk
Plaintext | 0 | 10 seconds ago
rogue linage script
Plaintext | 0 | 11 seconds ago
how to make script pastebins for roblox
Plaintext | 0 | 5 minutes ago
nebula star glitcher dll download
Plaintext | 0 | 5 minutes ago

Paste Settings

Site Languages